+33 4 69 96 80 70hello@lyzerled.com
Displays LED

Plug. Play. Stand out.

Move fast. Be seen.

  • Plug & play
  • Mobile
  • Indoor & outdoor
  • Syncable
Assemble

Link up to 5 LED posters side by side: the image stays continuous, with no visual break.

Displays LED

LyzerLED’s plug-and-play range brings together 3 devices designed to capture attention in stores, at trade shows and at events: the LED Poster, the LED Counter and the LED Showcase.

Mobile, quick to install and easy to control, these LED displays offer high visibility, excellent image quality and immediate integration into any indoor environment.

An ideal solution to energize visual communication, showcase products and make an instant impact.

LED Counter · P1.8 – P2.5

Reception furniture becomes media

01A counter, a continuous 1.71 m LED façade, rounded corners with no break in the image.
  • Pixel pitchP1.8 · P2.5
  • LED façade1,710 mm, rounded corners
  • Brightness600 cd/m²
02Fine right into the curve: the rounded corners keep the image continuous, and the horizontal joint divides the façade into two zones, 800 and 160 mm.
  • LED modules320 × 160 mm, magnetic
  • Two zones800 mm + 160 mm
  • Refresh rate≥ 3,840 Hz
03Side view: 588 mm deep, the LED wraps around the returns. The counter reads from the front as well as at an angle.
  • Footprint1,710 × 588 mm
  • ChassisRigid one-piece steel
  • FinishMatte black, fingerprint-resistant
04At the back, a real workstation: cabinets, a drawer, outlets, built-in controller. Everything is on board.
  • Storage2 cabinets + drawer, lockable
  • Outlets2 built-in outlets
  • Power110 – 220 V AC, protected
05Casters, plug & play: plug it in, switch it on, and the counter becomes the bright focal point of the space.
  • Direct playbackUSB drive
  • WirelessWi-Fi · optional 4G
  • WiredPC + HDMI / Ethernet
  • Mobility8 casters, leveling feet
LED content

Drag to rotate the counter

P2.5 LED counter, three-quarter front view
3 gammes

Three formats ready to broadcast

LED Poster
Range 01

LED Poster

The mobile, full-height LED totem. From €4,500 excl. VAT.

Freestanding vertical LED display

A slim, self-contained, full-height mobile LED totem, designed to grab attention instantly in high-traffic areas.

Plug & play solution

Fast setup for smooth rollouts in stores, on trade show booths, or at event receptions.

Built-in mobility on casters

Every totem is designed to be moved, repositioned, and reused easily as the venue’s needs change.

Indoor or outdoor version, depending on use

Indoor from P1.25 to P2 (600 to 700 nits) for sharp close-up viewing; outdoor from P1.53 to P2.5, up to 800 nits, for exposed spaces and long-distance viewing.

Combinable, synchronized totems

Up to 5 units can be placed side by side to create one continuous LED surface, with no visual break.

Optimized transport

Delivered in a flight case or dedicated crate to protect every move and simplify logistics.

LED Counter
Range 02

LED Counter

Reception furniture becomes media. From €13,500 excl. VAT.

LED façade built into the furniture

The LED counter turns a desk, a bar, or a reception area into a dynamic LED display surface with high perceived value.

Straight or curved

90° version (960 × 384 px, 2.5 m²) for a structured layout; curved version (1,024 × 384 px, 2.7 m²) for a more theatrical, premium presence.

Self-contained and mobile

A solution designed to keep pace with your activations, without complicating on-site operations.

Optimized for close viewing

The P2.6 pitch delivers excellent legibility for nearby visitors, ideal for reception areas, in-store promotions, or product demos.

Simplified mobility and logistics

Media furniture designed to be installed, moved, and reused from one event to the next.

LED Showcase
Range 03

LED Showcase

The product, staged by the screen.

Freestanding vertical LED display

A slim, self-contained, full-height mobile LED totem, designed to grab attention instantly in high-traffic areas.

Plug & play solution

Fast setup for smooth rollouts in stores, on trade show booths, or at event receptions.

Built-in mobility on casters

Every totem is designed to be moved, repositioned, and reused easily as the venue’s needs change.

Optimized transport

Delivered in a flight case or dedicated crate to protect every move and simplify logistics.

Benefits

01

Instant, scalable visual impact

A solution that catches the eye instantly and can grow from a standalone unit into a more ambitious scenography.

02

Highly flexible use

Easy to move, reconfigure, and reuse, LED totems and LED counters adapt to different venues, key moments, and communication formats.

03

Spotlight on strategic zones

Reception, walkways, storefront, corner, booth, bar, VIP area: every touchpoint becomes more visible, more legible, and more memorable.

04

A natural fit in a complete LED ecosystem

These formats integrate seamlessly into a broader strategy alongside transparent Mesh LED, indoor LED, and custom LED shapes.

5 products

Five models ready to broadcast

Indoor and outdoor totems, straight and curved counters, display showcase: complete spec sheets and indicative purchase prices. The configurator assembles your totems and calculates the resulting surface.

Full catalog
Indoor LED Poster
LED furniture · Indoor

LED Poster Totem Indoor

The LED Poster Totem Indoor is a slim, freestanding LED totem for high-impact indoor visual communication. Its high resolution renders content with precision in any high-traffic space. Up to 5 units combine with no visible bezel or seam, forming a continuous LED surface that can be deployed in minutes.

from 4 500 € HTindicative purchase price, per totem
SpecificationP1.25P1.53P1.86P2
Pixel pitch (mm)1.251.531.862
Pixel density640,000 px/m²422,500 px/m²288,906 px/m²250,000 px/m²
Brightness600 nits600 nits600 nits700 nits
Display dimensions (mm)640 × 1920
Display area (m²)1,23
Refresh rate3,840 Hz
Viewing angle140°
Front protectionGOB (Glue On Board)
Structure / finishBlack, white or gray
UseIndoor
Operating systemAndroid
AudioBuilt-in speakers
ConnectivityUSB, Ethernet
Wireless connectivityWi-Fi
ControllerAsynchronous – Novastar
Input voltage100–240 V~ (AC), 50/60 Hz
Built-in power supplyMeanWell or G-Energy
Power connectorIEC C13/C14
Max. power consumption (W)360360400360
Avg. power consumption (W)120120135120
MaintenanceFront
Installation methodMobile version (on casters)
Overall dimensions (W × H × D) (mm)640 × 1920 × 60
Net weight (kg)55
Gross weight (kg)110
PackagingFlight case
Control

A video architecture sized for every project

From a totem’s standalone player to the processor of a 200 m² wall: the control chain grows with the project. Scroll to deploy it.

Taurus TB60
Taurus TB60
VX400
VX400
VX2000 Pro
VX2000 Pro
MCTRL4K
MCTRL4K
NovaPro UHD Jr
NovaPro UHD Jr
Media server
Media server
H15
H15
Modular processor

H15

Card-based chassis: add inputs and outputs as the wall grows. Redundancy, preview, calibration. For very large surfaces.

Capacity
130 M px
Area at P1.25
≈ 200 m²

Each LED control system is selected to suit the project. Resolution, dimensions, video sources and use cases determine the right controller or processor.

We carry out a complete technical study to define the most reliable and relevant solution.

Displays LED

Our projects

All projects
Request a quote

Let’s talk about your Displays LED project

Tell us where and when you want to broadcast (point of sale, trade show, event) and how many units you have in mind: we’ll get back to you with an initial technical and budget recommendation.

Why LyzerLED?

  • Greater visual impact in your strategic spaces
  • An LED solution designed around your real-world constraints
  • A single partner to design, produce and deploy
  • Interactive content to boost engagement
  • Premium expertise in service of your brand image
+33 4 69 96 80 70
hello@lyzerled.com
Project type *