Rolling Floor LED

Walk on it.

The floor becomes a screen. 13.5 millimeters, not one more.

13.5 mm
Rollable
100 kg / point
Interactive

Let’s talk about your project View specifications

Move your cursor over the floor: every step triggers a ripple, just like the interactive version under visitors’ feet.

Until now, the floor was the one surface in a space that said nothing. Rolling Floor LED changes that: an LED display you roll out like a carpet, lay without any structure, and walk, dance, or drive on.

Its slimness is everything: 13.45 mm thick, a beveled perimeter frame, no step, no podium, no recess in the slab. The LEDs are encapsulated in GOB resin with no plastic mask, no visible screws or seams: the surface is smooth, non-slip, washable, and supports 100 kg per contact point. Yes, you can park a car on it.

In the interactive version, infrared sensors built into every module detect steps in 30 milliseconds, with no blind spots and for several people at once. Our content does the rest.

Rolling Floor LED · 4 × 3 m · P1.95

Rolled out, aligned, lit up

01Eight 50 cm strips, rolled up like carpets: 4 × 3 m of LED floor fits in a single flight case.

Strip500 mm wide, 3 m long
Slat62.5 mm, articulated
TransportFlight case on casters

02Roll it out directly on the existing floor. No structure, no raised floor: each slat lays down and snaps magnetically to the previous one.

MountingMagnetic, quick swap
Weight17 kg/m²
Power24 V DC · 170 W/m² on average

03Flush with the floor: 13.45 millimeters. No step, no podium, and yet a car can drive over it.

Thickness13.45 mm
Load100 kg per contact point
Total load2.5 t/m², vehicle access

04The beveled perimeter frame closes all four sides: it houses the cabling and handles the transition to the floor.

FrameBeveled, 4 sides, no step
InstallationScrewed or double-sided tape
CablingHoused in the frame

05Up close: the LEDs are embedded in GOB resin. No plastic mask, no visible screws, a smooth, continuous surface.

FinishGOB · IK10
Example pitchP1.95 · SMD1010 · 256 × 32 px / slat
ProtectionIP65 front · IP41 back

06Once lit, the floor becomes the stage. In the interactive version, infrared sensors react to every step in 30 ms.

Brightness> 600 cd/m² · 12–16 bit
Refresh rate3,840 Hz · 1/32 scan
Interactive30 ms, multi-user

Drag to orbit · hover over the floor to light it up

Rolling Floor LED rolled out in a car showroom

Rolling Floor LED installation diagram: unrolled roll, perimeter frame, cabling

Beneath the surface

Rolled out, aligned, plugged in: 13.45 mm

The roll is laid out on the existing floor. A beveled perimeter frame houses the cabling and is fixed with screws or double-sided tape. There is nothing underneath: no structure, no raised floor.

13.45 mm: module thickness: the thinnest LED floor we install.
100 kg: per contact point, 2.5 t distributed: heels, carts, light vehicles.
17 kg/m²: and 170 W/m² on average: a floor you can transport and plug into a standard outlet.
30 ms: response time for the interactive version, with no blind spots.

2 gammes

Two versions, the same slimness

Rolling Floor

Range 01

Rolling Floor · LZ-RF500

The video floor that rolls out and packs away.

Articulated 500 × 62.5 mm GOB modules, rolled up in a flight case. Laid directly on the floor in minutes, with no structure. Three pitches from P1.95 to P3.9.

13.45 mm thick, zero structure

The floor lays directly on top of the existing floor. A beveled perimeter frame, screwed or glued, houses the cabling and handles the transition: no step, no podium, no channel cut into the slab.

Rolls out like a carpet

The modules are articulated: the display rolls up, travels in a flight case on casters, and rolls out on site. Setup and teardown in minutes, reusable from one event to the next.

100 kg per point, 2.5 tonnes in total

The surface handles a stiletto heel as well as a light vehicle. Car showroom, runway show, stage: it withstands everything a real floor goes through.

GOB surface, no screws or seams

The LEDs are embedded in protective resin: no plastic mask, no dark lines, no screw heads. A continuous image, non-slip, impact- and scratch-resistant.

IP65 on the front

Splashes, spilled drinks, wet cleaning: you maintain it like any floor. For indoor use, trade shows and events included.

P1.95 to P3.9, 600 to 700 cd/m²

Fine pitch for close-up viewing (showroom, retail), larger pitch for big stage surfaces. 3,840 Hz: sharp to the eye and on camera.

Interactive Rolling Floor

Range 02

Rolling Floor · LZ-RF500i

The floor that responds to footsteps.

Same floor, same slimness, plus a layer of infrared sensors in every module. Content reacts to every step, for several people at once, with no controller or app.

Built-in infrared sensors

Detection sits inside the module, not in a ceiling camera: no calibration, no blind spots, no cast shadows. The floor knows exactly where each foot lands.

30 millisecondes

Response time is faster than perception: the ripple starts from the foot the moment it touches the floor. The illusion holds because there is no lag.

Multi-user

Each step is detected independently. Ten people on the floor, ten distinct reactions: group games, guided paths, crowd scenography.

Still 13.45 mm

The interactive layer adds no thickness, no structure, no step. Installation requirements are the same as the standard version.

Reactive content by our studio

Ripples, particles, water, foliage, products appearing underfoot: we design the interactive scenarios and integrate them into the controller. Compatible with your own real-time content.

Adaptive U3D format

The mapping adapts to the shape of the installed surface: corridor, square, L-shape. The content follows the floor, not the other way around.

Benefits

The surface nobody was looking at

Walls, shop windows, totems: attention is saturated at eye level. The floor is free, and a floor that comes alive underfoot stops visitors in their tracks.

Zero construction, zero steps

13.5 mm laid directly on the floor: no podium, no accessibility ramp to plan, no recess. Roll it out, align it, plug it in.

From showroom to stage

Vehicle display, runway show, TV set, booth, dance floor, museum: one roll serves many uses and packs away in between.

Interaction with no middleman

No app to download, no controller, no queue: you walk, it reacts. Participation rates for an interactive floor installation are unmatched.

A screen just 13.5 mm thick, rolled out like a carpet, that you walk on.

Pitch

Every pixel counts

Three pitches for the floor: P1.95 for a fine image viewed up close, in showrooms or retail; P2.6 for the balance between detail and surface; P3.9 for large stage and event surfaces viewed from a distance.

The configurator calculates the number of modules, power consumption, and weight for your surface.

Fine RangeP1.95

Showroom · Retail · Museum

Standard rangeP2.6

Booth · Reception · Activation

Large rangeP3.9

Stage · Runway · TV set

2 products

Two models, one spec sheet each

Pitch, resolution, load capacity, protection, power consumption, and installation method. The configurator sizes your floor surface.

Full catalog

LZ-RF500 · Rolling Floor

LZ-RF500 · Indoor

Rolling Floor LED

The LZ-RF500 is an LED floor that rolls out like a carpet: 500 × 62.5 mm GOB modules, 13.45 mm thick, hinged together and laid directly on the floor with no substructure. Resin-coated surface with no mask or visible screws, 100 kg per contact point and up to 2.5 t distributed: walk on it, dance on it, park a car on it. Three pitches from P1.95 to P3.9.

Any size in 500 mm increments: the surface is built from strips of modules and finished with a beveled frame.

Price on requestpriced according to integration

Configure View in catalog

Gallery

Specification	P1.95	P2.6	P3.9
Pixel pitch (mm)	1.95	2.6	3.9
LED	SMD1010 GOB	SMD1415 GOB	SMD2020 GOB
Module (W × H × D) (mm)	500 × 62.5 × 13.45 — hinged, rollable modules
Module resolution	256 × 32 px	192 × 24 px	128 × 16 px
Pixel density	262,144 px/m²	147,456 px/m²	65,536 px/m²
Brightness	> 600 cd/m²	> 700 cd/m²	> 700 cd/m²
Color depth	12 – 16 bits
Refresh rate	3,840 Hz
Scan	1/32	1/24	1/16
Load capacity	100 kg per contact point — up to 2.5 t distributed (light vehicle)
Surface	GOB: resin encapsulation, no PC mask, no visible screws or seams, non-slip
Protection	IP65 front / IP41 rear
Weight	17 kg/m²
Max. power consumption (W/m²)	512
Avg. power consumption (W/m²)	170
Controller	Synchronous – Novastar
Input voltage	100–240 V~ (AC), 50/60 Hz
Built-in power supply	MeanWell or G-Energy
Installation method	Rolled out on the floor, no substructure: beveled perimeter frame screwed or glued (double-sided tape), cabling inside the frame.
Use	Indoor (IP65 front face: can be cleaned with water)
Packaging	Roll in a flight case on casters

LZ-RF500i · Interactive

LZ-RF500i · Indoor

Interactive Rolling Floor LED

The LZ-RF500i adds a layer of infrared sensors built into every module of the rollable floor: it detects footsteps in 30 ms, with no blind spots, and responds to several people at once. Same slim profile (13.45 mm), same strength (100 kg per point), same substructure-free installation. Reactive content is created by our studio.

Multi-user: each footstep is detected independently, so content can react differently to each visitor.

Price on requestpriced according to integration

Configure View in catalog

Gallery

Specification	P1.95	P2.6	P3.9
Pixel pitch (mm)	1.95	2.6	3.9
LED	SMD1010 GOB	SMD1415 GOB	SMD2020 GOB
Module (W × H × D) (mm)	500 × 62.5 × 13.45 — hinged, rollable modules
Module resolution	256 × 32 px	192 × 24 px	128 × 16 px
Pixel density	262,144 px/m²	147,456 px/m²	65,536 px/m²
Brightness	> 600 cd/m²	> 700 cd/m²	> 700 cd/m²
Color depth	12 – 16 bits
Refresh rate	3,840 Hz
Scan	1/32	1/24	1/16
Load capacity	100 kg per contact point — up to 2.5 t distributed (light vehicle)
Surface	GOB: resin encapsulation, no PC mask, no visible screws or seams, non-slip
Protection	IP65 front / IP41 rear
Weight	17 kg/m²
Max. power consumption (W/m²)	512
Avg. power consumption (W/m²)	170
Controller	Synchronous – Novastar
Input voltage	100–240 V~ (AC), 50/60 Hz
Built-in power supply	MeanWell or G-Energy
Installation method	Rolled out on the floor, no substructure: beveled perimeter frame screwed or glued (double-sided tape), cabling inside the frame.
Use	Indoor (IP65 front face: can be cleaned with water)
Sensors	Infrared, built into every module — 30 ms response time, no blind spots, multi-user
Packaging	Roll in a flight case on casters

Control

A video architecture sized for every project

From a totem’s standalone player to the processor of a 200 m² wall: the control chain grows with the project. Scroll to deploy it.

Modular processor

H15

Card-based chassis: add inputs and outputs as the wall grows. Redundancy, preview, calibration. For very large surfaces.

Capacity: 130 M px
Area at P1.25: ≈ 200 m²

Every LED floor starts with a study: surface area and shape to cover, existing floor type, foot traffic, expected loads, content, and interactive scenarios.

The Novastar controller, the content server and, for the interactive version, the real-time engine are sized accordingly.

Discover our other LED solutions

Request a quote

Let’s talk about your Rolling Floor project

Tell us the floor area, the venue (showroom, stage, store, trade show), and whether you’re considering an interactive version: we’ll get back to you with a technical and budget recommendation.

Why LyzerLED?

Greater visual impact in your strategic spaces
An LED solution designed around your real-world constraints
A single partner to design, produce and deploy
Interactive content to boost engagement
Premium expertise in service of your brand image

+33 4 69 96 80 70

hello@lyzerled.com