+33 4 69 96 80 70hello@lyzerled.com
Flexible LED

Bend the pixel.

Shape the image, protect every pixel.

  • Indoor
  • Concave & convex
  • Magnetic front service
  • GOB protection
Let’s talk about your project View specifications

Scroll down: further on, the module bends, 288 modules snap magnetically onto their frame, then a module is replaced from the front, live.

Flexible LED

An LED display has always been flat. LyzerLED Flexible LED no longer is: its flexible, thin, magnetic modules bend concave or convex to wrap a column, draw a ring or ripple along a wall.

Curved LED walls, digital columns, cylindrical shapes, architectural cladding: the image stays bright, uniform and seamless, whatever the curve. Maintenance is done from the front, module by module, and the GOB finish encapsulates each LED in a resin that protects it from moisture, splashes, dust and impact.

This is the technology behind the “¡Hala Madrid!” ring and the columns at the Real Madrid Official Store.

Flexible LED · Architecture

Shape becomes screen

01Every detail counts. From the back, the 320 × 160 mm module reveals its ribbed shell, circuit board, built-in magnets and connectors.
  • Module320 × 160 mm unrolled
  • MountingMagnetic, screwless
  • Front faceGOB finish
02Following the curve: the module bends concave, then returns flat. Its length, measured along the arc, stays the same.
  • BendConcave
  • DimensionsConstant along the arc
  • UseIndoor · IP31
03Reversing the curve: the same module now bends convex. One single reference for both directions.
  • BendConvex
  • Radius shownIllustrative, to be confirmed per reference
  • SurfaceGOB, sealed LEDs
04A custom, fully equipped frame: behind each opening sit a power supply, a receiving card and two data ribbon cables. The module simply snaps into place.
  • FrameCurved profiles, steel interfaces for the magnets
  • Per openingPower supply, receiving card, 2 ribbon cables
  • ExampleDesign radius 3.20 m
05288 modules, one seamless surface: installation cascades across a 5.12 × 2.88 m unrolled layout.
  • Layout288 modules · 16 × 18
  • Area14.75 m²
  • Unrolled5.12 × 2.88 m
06Light takes shape: a single animated piece of content flows across the entire GOB surface, with no visible seams.
  • ContentOne source, continuous UVs
  • FinishGOB, cleanable
  • Format16:9 unrolled
07A localized fault: a single module shows glitches. The rest of the screen keeps playing.
  • ModuleR10 · C09
  • Rest of the screenPlayback maintained
  • AccessFrom the front
08Front access: the suction tool meets the face, then pulls the module out. The bay stays open and shows its equipment, with nothing to dismantle.
  • ToolMaintenance suction tool
  • MountingMagnets, screwless
  • BayPower supply and card visible
09Precise replacement: the new module snaps onto its magnetic mounts, the suction tool withdraws and the image is whole again.
  • ReplacementNew module, same position
  • ImageContent reconnected
  • ServiceFull front service
10The same 3D wall placed in its setting: only the surroundings change, the wall keeps its geometry and scale. Generated setting, for illustration only.
  • WallThe same 3D object, unretouched
  • Front width≈ 4.59 m (chord of the 3.20 m radius)
  • SettingGenerated image, no screen
Flexible LED ring and columns, Real Madrid Official Store
Back of the Flexible LED module: flexible shell, built-in magnets, connectors
Inside the module

Flexible at the back, protected at the front

A flexible rear shell you can bend by hand, built-in magnets all around the edge, short connectors, and a GOB front face that seals the LEDs in resin. That’s all it takes for a screen to wrap around a column.

320 × 160
mm per module: surfaces built in 16 cm increments, in width and in height.
R 130 mm
approximate bend radius, concave or convex: column, ring, wave.
0 vis
built-in magnets hold the module in place; removal is from the front.
GOB
encapsulated LEDs: impact-resistant, dustproof, moisture-resistant, cleanable.
LZFXB

LZFXB · Flexible LED

The flexible LED display, with no limits on shape.

A 320 × 160 mm module with a flexible back shell, built-in magnets and a GOB face. Concave or convex, it mounts and dismounts from the front, without a single screw. Four pitches from P1.25 to P2.5.

Creative flexibility

Curved, cylindrical, wavy or oval LED surfaces: the module follows a radius down to about 130 mm, in both directions. The screen becomes part of the scenography, not a rectangle placed on top of it.

Protective GOB finish

The LEDs are encapsulated in resin: impacts, dust, moisture and repeated handling in a store or on a booth leave them unaffected. The surface wipes clean with a cloth.

Thin, lightweight modules

About 12 mm thick, 9 kg/m²: the module fits into tight spaces, custom cladding or mobile installations without weighing down the structure.

Magnetic mounting

Built-in magnets hold the module firmly against its curved frame: fast assembly, precise alignment, no complex hardware on site.

Front maintenance

Every module comes out from the front, even at the top of a column or deep inside a ring: no rear access, no dismantling the structure.

Immersive, continuous image

P1.25 to P2.5, 600 to 700 cd/m², ≥ 3,840 Hz: a sharp, rich, stable image that flows from one module to the next with no visible seam.

The installations

One module, four shapes and every other

The same 320 × 160 mm module wraps a pillar, hugs a curved wall, closes a suspended ring or traces a wave. Only the curved support structure changes; the image stays continuous across the entire curve. Concept visuals, to help you picture it.

Digital column in Flexible LED
01

Digital column

A mall pillar becomes a 360° display: convex, edge-free, readable from every side of the concourse.

Curved wall in Flexible LED
02

Curved wall

A concave panorama that wraps around the visitor: lobbies, showrooms, museums. The image runs from end to end without a break.

Suspended ring in Flexible LED
03

Suspended ring

A truncated LED cone beneath a glass roof, visible from every level. The concept behind the ring at the Real Madrid Official Store.

Wave and arch in Flexible LED
04

Wave and arch

Concave, then convex, on the same surface: a sculptural ribbon that turns the screen into a piece of architecture.

Removing a Flexible LED module from the front with a suction tool, on a ring
Operation

Maintenance happens from the front

Even on a suspended ring or at the top of a column, a suction tool is all it takes to release a module from its magnets. No rear access, no structure to dismantle: replacement takes just minutes, without cutting the image on the rest of the surface.

Benefits

01

Create custom LED shapes

Curved walls, digital columns, undulating surfaces, cylindrical installations: shapes that are impossible with a rigid LED display, built module by module.

02

Boost scenographic impact

Retail, events, showrooms: the flexible display turns architectural volumes into immersive, memorable visual media, right where the eye never expected to find an image.

03

Simplified installation and maintenance

Magnetic mounting and front maintenance: installation, module replacement and day-to-day operation stay simple, even on a complex surface.

04

Enhanced protection with GOB finish

Humidity, water splashes, dust, impacts: GOB resin protects the LEDs for a more durable, more reliable flexible display in high-traffic venues.

An LED architecture designed to bring continuous, seamlessly integrated immersive surfaces to life.

Pitch

Every pixel counts

A complete range for every viewing distance. From a fine pitch for a column viewed at two meters to wider pitches for a wave spanning several meters, every configuration is designed for the best rendering for your use case.

Fine RangeP1.25 – P1.56

Columns, rings and bands viewed up close.

Precision RangeP1.86

Undulating walls for showrooms and flagships.

Comfort RangeP2.5

Large waves and cladding viewed from a distance.

Model

The flexible module spec sheet

Four pitches, resolution and density per module, brightness, power consumption, mounting and maintenance. The configurator sizes your unfolded surface.

Full catalog
LZFXB · Flexible
LZFXB · Indoor

Flexible LED

The LZFXB is a 320 × 160 mm flexible LED module: a flexible back shell, built-in magnets and a GOB front face that encapsulates the LEDs in protective resin. It bends concave or convex to form curved walls, columns, waves or ovals, attaches magnetically to its frame without screws and is removed from the front. Four pitches from P1.25 to P2.5.

Bending radius down to approx. 130 mm depending on pitch (concave or convex). GOB surface: LEDs protected from impacts, dust, moisture and handling.

Price on requestpriced according to integration
Configure View in catalog
Gallery
SpecificationP1.25P1.56P1.86P2.5
Pixel pitch (mm)1.251.561.862.5
LEDSMD1010SMD1212SMD1212SMD1515
Module resolution (320 × 160 mm)256 × 128 px204 × 102 px172 × 86 px128 × 64 px
Pixel density640,000 px/m²406,406 px/m²288,906 px/m²160,000 px/m²
Brightness600 cd/m²600 cd/m²600 cd/m²700 cd/m²
Refresh rate≥ 3,840 Hz
Viewing angle140°/140° (H / V)
Module size (W × H) (mm)320 × 160 — flexible back shell, concave or convex bending
Native format16:9 (2K / 4K / 8K)
SurfaceGOB: LEDs encapsulated in resin, impact-resistant, dustproof, moisture-resistant
MountingMagnetic (built-in magnets), no screws
MaintenanceFront (full front service)
Support structureDie-cast aluminum or custom curved frame
ProtectionIP31 (GOB front face)
UseIndoor
ControllerSynchronous – Novastar or Kystar
Input voltage100–240 V~ (AC), 50/60 Hz
Built-in power supplyMeanWell or G-Energy
Max. power consumption (W/m²)480480480420
Avg. power consumption (W/m²)≈ 160
Control

A video architecture sized for every project

From a totem’s standalone player to the processor of a 200 m² wall: the control chain grows with the project. Scroll to deploy it.

Taurus TB60
Taurus TB60
VX400
VX400
VX2000 Pro
VX2000 Pro
MCTRL4K
MCTRL4K
NovaPro UHD Jr
NovaPro UHD Jr
Media server
Media server
H15
H15
Modular processor

H15

Card-based chassis: add inputs and outputs as the wall grows. Redundancy, preview, calibration. For very large surfaces.

Capacity
130 M px
Area at P1.25
≈ 200 m²

Every curved surface starts with a study: radius, unfolded surface, curved support structure, video sources and mapping of the image onto the shape.

The controller or processor is selected according to resolution and geometry for a continuous, seamless image across the entire curve.

Flexible LED

Our projects

All projects

Discover our other LED solutions

Compare solutions
Transparent Mesh LED
Transparent Mesh LED
Indoor Pro LED
Indoor Pro LED
Custom Shape LED
Custom Shape LED
Displays LED
Displays LED
Rolling Floor LED
Rolling Floor LED
Request a quote

Let’s talk about your Flexible LED project

Tell us about the shape you want to clad (column, ring, wave, curved wall), its dimensions or radius, and share a few photos or drawings: we’ll get back to you with an initial technical and budget recommendation.

Why LyzerLED?

  • Continuous LED surfaces, flat or curved, with no visual break
  • Premium image quality, even at very short viewing distances
  • GOB technology built for demanding environments
  • Custom integration tailored to every space
  • LyzerLED expertise to design lasting immersive experiences
+33 4 69 96 80 70
hello@lyzerled.com
Project type *